Skip to content

Tap & toilet repairs, Central Coast Tap, Toilet & Fixture Repairs

Licensed plumber & gas fitter · the Central Coast & Lake Macquarie

The small jobs done right while we are there. A dripping tap or a running toilet wastes water and money, and they are quick to sort properly. We repair or replace taps, mixers, toilets and tapware, and leave the fittings clean and tight. Not sure whether yours is worth fixing or due for a swap? Read the tap and toilet repair-or-replace guide.

Request a callback

Get a callback from Josh

Leave a name and number and Josh calls you back, usually the same day. Can't wait? Call 0431 549 178.

What's included

  • Leaking taps & mixers
  • Running toilets & cistern repairs
  • Tapware & showerhead swaps
  • New basin & vanity taps
  • Toilet replacement & installation
  • Washer & cartridge repairs

What's not included

  • Tiling, waterproofing or vanity work after a fixture swap
  • Repiping beyond the fixture itself, that is quoted as its own job
  • Appliance supply, we plumb in what you have bought unless supply is in the quote

Toilet replacement and cistern repairs

A cistern that keeps running usually needs a new inlet valve or flush seal, a cheap repair. A cracked pan, a suite that leaks at the base, or one whose parts are no longer made is a toilet replacement: the old suite comes out and the new one is installed, connected and tested. In-wall cisterns have gone in on renovations at Gwandalan, Woongarrah and Bateau Bay, and bidet seats have been fitted to existing suites in Merewether and Chisholm.

Bathroom vanity and vessel basin, Mannering Park.

Indicative pricing

$120–$450

A market-typical guide, not a quote. Your exact price for the job is confirmed in writing before any work starts.

See the full price guide

Licensed & insured

Every job is carried out by Josh, a licensed plumber and gas fitter (NSW licence 498220C; Donza Plumbing Pty Ltd, ABN 51 697 209 153), and certified to AS/NZS 3500 plumbing & AS/NZS 5601 gas.

Gas Fitting$20 million public liabilityUpfront quotes

Servicing

On the tools

Heated bidet seat retro-fitted to an existing suite, water and power connected, Merewether.
Heated bidet seat retro-fitted to an existing suite, water and power connected, Merewether.
Electric bidet seat fitted to an existing toilet suite, Chisholm.
Electric bidet seat fitted to an existing toilet suite, Chisholm.
Second bidet seat install, water and power connected, Chisholm.
Second bidet seat install, water and power connected, Chisholm.
Vanity basin and brushed tapware going on at fit-off, Wyee Point.
Vanity basin and brushed tapware going on at fit-off, Wyee Point.
Wall mixer and vessel basin on a finished vanity, Mannering Park
Wall mixer and vessel basin on a finished vanity, Mannering Park
Stone basin and chrome tapware
Stone basin and chrome tapware
Stainless troughs and tapware in a site amenities donga
Stainless troughs and tapware in a site amenities donga

Try this first

When it is a job for us.

Worth a go yourself

  • Clean the aerator, a blocked aerator looks like low pressure
  • Check the isolation tap under the sink is fully open
  • Lift the cistern lid and check the flapper is seating properly

Call us when

  • The tap still drips after a washer or the body is pitted
  • Water is getting into the vanity or the subfloor
  • The toilet rocks, leaks at the base or refills on its own
  • You want the fixture replaced properly, not patched

What it costs

Tap repairs and swaps run $120–$280 and toilet repairs or replacement $150–$450 in the price guide. Small jobs are quoted as a fixed price, so you know the number before we touch a fitting.

Recent work

Fit-off work is constant: tapware, basins and toilets going in on bathroom renovations at Lake Munmorah, Gwandalan, Wyee Point and Yarramalong, with the same small repairs done on their own between the bigger jobs. On a bathroom renovation in Bonnells Bay, we fitted off dual vessel basins and wall mixers.

How the job runs

What to expect, start to finish.

  1. List the jobs

    Tell us what is dripping, running or due for a swap, photos help.

  2. Fixed price

    One number for the lot, agreed before a tool comes out.

  3. Repair or replace

    Washers, cartridges, valves and suites repaired or swapped on the day.

  4. Test and tidy

    Everything run and checked for leaks, fittings left clean and tight.

Good to know

Tap, Toilet & Fixture Repairs FAQs

Is a dripping tap worth a call-out?

Usually yes, and not just for the water bill. A drip left long enough wears the seat so a washer will not fix it, and the leak you can see is often joined by one under the sink you cannot. If it is a quick washer or cartridge job, that is exactly what we charge for.

Repair the toilet or replace the suite?

A running cistern, inlet valve or flush seal is a cheap repair and worth doing. A cracked pan, a suite that leaks at the base, or one so old the parts are gone is the replace case. We quote both where both exist and let you decide.

Can you do a few small jobs in the one visit?

That is the efficient way to use the visit. The dripping mixer, the toilet that refills itself and the showerhead you have been meaning to swap can all be priced and done together, quoted as one fixed number before we start.

Can you install a toilet I have already bought?

Yes. We plumb in the suite you have bought, and supply one only where that is in the quote. A toilet replacement is quoted as a fixed price before we start, and the new suite is tested for leaks before we leave.

Customer feedback

What customers say.

Customer feedback
Josh did an incredible job for us, the way he conducts himself is outstanding. Polite, respectful and great workmanship Highly recommend him.
LLisa TurnerGoogle review
Bathroom and hot water
Very happy with the service and the jobs we have had done. Turns up on time pricing is great and time frame to book was good I would recommend
SSharon JaquesGoogle review
RecommendedCustomer feedback
Professional with high attention to detail
CChris FlemingFacebook recommendation