Kitchen plumbing, Central Coast Kitchen Plumbing
Licensed plumber & gas fitter · the Central Coast & Lake Macquarie
Kitchen tapware, sinks, dishwashers and waste, in homes and in commercial kitchens. We fit and repair the fixtures, run new wastes, and take on grease-trap work where a food-prep site needs it. Quoted by the job, left clean, certified where the work requires it.
Request a callback
Get a callback from Josh
Leave a name and number and Josh calls you back, usually the same day. Can't wait? Call 0431 549 178.
What's included
- Kitchen tapware and mixers
- Sinks, basins and dishwashers
- Waste and trap repairs
- Grease traps for commercial kitchens
- Hot water to the kitchen
- Quoted before we start
What's not included
- Cabinetry, benchtops and splashbacks, we work in with your cabinetmaker
- Appliance supply unless it has been written into the quote
- Gas cooktop work by anyone but a licensed gas fitter, which Josh is

Licensed & insured
Every job is carried out by Josh, a licensed plumber and gas fitter (NSW licence 498220C; Donza Plumbing Pty Ltd, ABN 51 697 209 153), and certified to AS/NZS 3500 plumbing & AS/NZS 5601 gas.
Servicing
On the tools





Try this first
When it is a job for us.
Worth a go yourself
- Clean the aerator if the kitchen tap has gone weak
- Check and clear the sink trap before calling it a blocked drain
Call us when
- Moving the sink, tap or dishwasher point to a new spot
- A dishwasher or fridge water line that needs a proper connection
- Any gas cooktop connection or line work, it is licensed gas fitting
- A commercial kitchen with a grease-trap or trade-waste requirement
What it costs
Kitchen tapware and small waste repairs fall in the same $120–$280 band as tap repairs generally. Relocations and commercial fit-out work are quoted to the drawings as a fixed price before we start.
Recent work
Kitchen work runs from a first-aid room kitchenette fit-out, stainless sink, mixer and under-bench hot water, to plumbing for a new kitchen and hot water service at The Entrance, done on the same job as a bathroom re-arrange with core holes through a suspended slab. On a rural property at Jilliby, a floor waste set in a shed slab was run to a new absorption trench serving that floor waste and a sink in a chicken-prep area, with a vent, a sink point, an overflow relief gully and a provision for a future connection. For a shop at Soldiers Beach, in the Norah Head locality, the surface levels around the grease trap were raised so stormwater runoff stops entering the system.
How the job runs
What to expect, start to finish.
Scope the layout
Fixture positions and appliance list, photos or drawings get us most of the way.
Fixed quote
One number for the plumbing and the gas side, agreed before work starts.
Rough-in and connect
Wastes, water points and gas set where the joinery needs them.
Test and certify
Everything run and leak-checked, gas work certified to AS/NZS 5601.
Good to know
Kitchen Plumbing FAQs
Can you move the kitchen sink or tap to a new spot?
Usually, and it is the same reasoning as a bathroom: new supply and waste runs set out before the joinery goes in. The fixed quote comes off the layout, so the price is known before the kitchen is pulled apart.
Do you install dishwashers and fridge water lines?
Yes, dishwashers, fridge water points and mixer connections are regular work. What matters is the connection being done properly: a proper isolating valve and a waste that will not leak into the cabinet.
Do you do commercial kitchens and grease traps?
Yes. Trade waste, floor wastes and grease traps for food-prep sites are part of the commercial work. Greasy kitchen wastewater needs a grease trap and trade-waste approval before it goes to sewer: Hunter Water in Lake Macquarie and Newcastle, Central Coast Council on the Coast. We install the trap to what that approval sets, not to a generic spec.
Can the gas cooktop be done in the same visit?
Yes, and that is the point of holding both licences. The sink, tapware and dishwasher are plumbing; the cooktop is gas work. One visit, one quote, and the gas side finishes with the compliance certificate it legally needs.
Customer feedback
What customers say.
Josh did an incredible job for us, the way he conducts himself is outstanding. Polite, respectful and great workmanship Highly recommend him.
Very happy with the service and the jobs we have had done. Turns up on time pricing is great and time frame to book was good I would recommend
Professional with high attention to detail
Related services
Bathroom Renovation Plumbing
Full renovation plumbing from rough-in to fit-off, in-wall cisterns, freestanding baths, slab core-holes, NDIS bathroom set-outs, working in with your builder and tiler, or bringing ours.
Hot Water Systems
Install, relocate, repair and replace gas, electric, heat-pump and continuous-flow hot water units, with the old unit taken away.
Gas Appliance Installation & Gas Lines
Gas appliance installs and changeovers, new and extended gas lines, cooktops, heaters, bayonets and gas hot water, finished with the compliance certificate to AS/NZS 5601.

